Keep Your Commercial Floors Looking Their Best — The Right Way

High-traffic floors deserve more than a quick mop. Whether you're maintaining a brand-new installation or restoring a well-loved surface, proper cleaning and sealing are key to keeping your space beautiful and protected for the long haul.

Tile Armor’s 8-step system is designed for commercial spaces that work hard — and need their surfaces to look good doing it.

See the Process in Action: How to Clean & Reseal a Commercial Floor with Tile Armor Products

Step 1: Clear the Space

Start by removing any furniture to maximize the cleaning area.

Before you break out the cleaning supplies, give yourself room to work. Move furniture, rugs, or decor off the surface.

This helps:

  • Ensure a more thorough clean
  • Prevent damage to furniture
  • Make applying sealer easier later

Step 2: Sweep or Vacuum

Sweep or vacuum to remove any loose particles.

Before deep cleaning, remove any surface debris like dust, dirt, or loose particles.

This helps prevent scratching the surface and allows the cleaner to work more effectively.

Step 3: Protect Surrounding Surfaces

Protect any surfaces that are not meant to be cleaned.

Use drop cloths, painter's tape, or plastic coverings to shield nearby walls, furniture bases, or decorative elements from cleaning products and splashes.

This is especially important for:

  • Metal finishes
  • Painted surfaces
  • Wood trims
  • Any delicate materials

Step 4: Pre-Wet the Surface

Start by pre-wetting the surface.

Spray or mop the floor with clean water to ensure the surface is thoroughly wet.

Why? A damp surface helps Cleaner absorb better, loosen grime faster, and deliver a deeper clean.

Heavy Duty Tile Cleaner

Step 5: Deep Clean with Athena’s Heavy Duty Tile Cleaner

Grime happens — especially in commercial spaces.

Start strong with Athena’s Heavy Duty Tile Cleaner.

It's designed to cut through:

  • Grease & oil stains
  • Built-up grime
  • Residue from spills
  • Everyday dirt from heavy foot traffic

How to Clean:

  1. Remove dust and debris using a broom or vacuum.
  2. Dilute Athena’s Heavy Duty Tile Cleaner based on the type of dirt.
  3. Apply the solution evenly with a mop or sponge.
  4. Let it sit for 10-15 minutes, scrubbing lightly with a non-abrasive sponge.
  5. Rinse thoroughly with clean water and dry the surface.
BUY ATHENA'S HEAVY DUTY TILE CLEANER NOW
Appolo's Oil Stain Remover

Step 6: Removing Tough Stains

Once your surface is clean, it’s time to tackle any remaining stains that need extra attention. Not every stain comes out with the first pass — and that’s totally normal in busy commercial spaces.

This step ensures your floor looks its absolute best before sealing.

How to Remove Oil Stains:

  1. Apply Apollo’s Oil Stain Remover directly to the affected area.
  2. Let it sit for 10-15 minutes to deeply penetrate the stain.
  3. Scrub gently with a non-abrasive sponge or brush.
  4. Rinse thoroughly with water and dry.

How to Remove Food Stains:

  1. Apply Artemis’ Food Stain Remover directly to the stained area.
  2. Let it work for 5-10 minutes.
  3. Wipe clean with a damp cloth or sponge.
  4. Rinse and dry the surface to restore its natural appearance.
Poseidon's Tile Primer Bottle

Step 7: Sealing Your Tiles with Poseidon's Tile primer and Zeus' Tile Sealer

Finish strong by applying Zeus’ Tile Sealer for long-lasting surface protection.

It defends against:

  • Stains and spills
  • Heavy foot traffic
  • Daily wear and tear

How to Prime and Seal:

1. Ensure the tiles are clean and dry.

2. Priming Your Tiles:

  • Apply Poseidon’s Tile Primer with a lambswool applicator, sponge, or cloth.
  • Allow the primer to penetrate the surface for 5-10 minutes.
  • For low-absorbent surfaces, wipe off any excess with a clean cloth.
  • For porous tiles, allow full absorption without residue.

3. Sealing Your Tiles:

  • Once the primer is dry, apply Zeus’ Tile Sealer in thin, even layers.
  • Let it penetrate for 5-10 minutes.
  • Remove excess sealer with a clean cloth to avoid surface marks.

4. Allow 12 hours to dry before exposing to traffic. For full protection, let the sealer cure for 24 hours.

Aphrodite's Daily Cleaner Concentrate

Step 8: Everyday Cleaning with Aphrodite's Daily Cleaner

Once your floor is sealed and protected, daily maintenance is simple with Aphrodite's Daily Cleaner

Designed for regular cleaning without damaging your sealer, Aphrodite's Daily Cleaner helps keep your commercial floor:

  • Fresh and clean
  • Free of everyday dirt and dust
  • Looking its best with minimal effort

How to Maintain:

  1. Dilute Aphrodite’s Daily Cleaner as directed (1-2 capfuls per 5 liters of water).
  2. Mop or wipe your tiles with the solution.
  3. Let the surface air dry; no rinsing required.
  4. For high-traffic areas, use regularly to prevent dirt buildup.
buy Aphrodite's Daily Cleaner now

Our Commitment to Quality:

  • Superior Formulas

    Each product is crafted using advanced technologies to ensure powerful and reliable performance.

  • Eco-Friendly Solutions

    We prioritize environmentally friendly ingredients that are safe for you and your home.

  • Expert Support

    Our knowledgeable team is always ready to provide guidance, ensuring you get the best results from our products.

Testimonials

What Customers Are Saying

Tile Armor’s products transformed my cement tiles! The cleaners and sealers are top-notch and easy to use—my floors have never looked better!

Alexander H.

Ohio

I used Tile Armor’s Athena’s Heavy Duty Tile Cleaner, and it worked wonders on deep stains that nothing else could touch. Highly recommend!

Sofia R.

New York

Tile Armor’s customer service is exceptional, and their products deliver exactly as promised. My tiles are cleaner, brighter, and well-protected!

John M.

Texas

Reviewer Name

Reviewer Profession