Apollo's Oil Stain Remover

Apollo is a powerful, solvent-based stain remover engineered to tackle stubborn oil stains. It penetrates deeply to lift and dissolve grease, oil, and similar tough stains without damaging the underlying material.

Apollo is effective on concrete, stone, and other hard surfaces. As with any tile product, conduct a preliminary test on a small, inconspicuous area first to confirm compatibility with your surface.

Apollo works as a poultice. When applied over an oil stain in a thick, even layer, it absorbs and lifts the oil out of the surface as it dries — pulling the stain up rather than just cleaning the top of the tile.

Sweep or vacuum the surface to remove dust, dirt, and debris, and make sure it is dry. Test in a small, hidden area first. For newly installed surfaces, wait until grout and adhesive are fully dried. Avoid applying on overly heated surfaces — apply during the cooler parts of the day. If the surface has existing wax or protective treatments, remove them so the stain remover can penetrate. Shake Apollo thoroughly, then cover the stain completely with a thick, even layer.
Allow it to dry fully until it turns to a powder. Once dry, remove the powder residue: for porous materials, use a soft-bristled broom or clean brush; for non-absorbent materials, use absorbent paper, a towel, or a cloth. Finish by cleaning the surface with a slightly damp cloth or mop, then allow it to dry fully before assessing the results. Repeat the application if needed.

Apollo needs to dry fully and turn to a powder before it can be removed. The exact time depends on temperature, humidity, and how thickly the product was applied. For stubborn or older stains, you may need to repeat the application process to fully draw out the stain.

Apollo is supplied in a 16.9 fl oz (500 mL) bottle. The amount needed per stain depends on the size and depth of the stain — apply a thick, even layer that fully covers the stain plus a small border.

No. Apollo is designed to lift existing oil stains, not to prevent future stains. For ongoing protection, follow up with Poseidon's Tile Primer and Zeus' Tile Sealer (or another appropriate sealer) for porous surfaces, and clean spills promptly.

Use only outdoors or in a well-ventilated area, ideally with local aspiration. Wear protective gloves, eye protection, and face protection; use a respirator if ventilation is limited. Keep Apollo away from heat, hot surfaces, sparks, open flames, and other ignition sources, and use non-sparking tools. Wash hands and face thoroughly after handling, and always review the Safety Data Sheet (SDS) before use.

Apollo is suitable for outdoor use, but avoid applying on overly heated surfaces — apply during the cooler parts of the day so the product dries and lifts the stain properly rather than evaporating too quickly.

Clean all application tools with water immediately after use. Store Apollo in its original sealed container in a cool, well-ventilated area away from direct sunlight, heat sources, open flames, sparks, and other ignition points.